Simpson HB5.50/11.88 Top Flange I-Joist Hanger - G90 Galvanized

August 27,2024

The newly improved Simpson Strong-Tie HB hangers offer wide versatility for I-joists and structural composite lumber. The enhanced load capacity widens the range of applications for these hangers. The Strong-Tie HB5.50/11.88 top flange hanger features a G90 galvanized finish for added corrosion resistance and requires.

Installation:

Use all specified fasteners.
LBV, B, BA and HB may be used for weld-on applications. Weld size to match material thickness (approximate thickness shown). The minimum required weld to the top flanges is 1/8 x 2 fillet weld to each side of each top flange tab for 14 and 12 gauge and 3/16 x 2 fillet weld to each side of each top flange tab for 7 gauge and 10 gauge. Distribute the weld equally on both top flanges. Welding cancels the top and face nailing requirements. Consult the code for special considerations when welding galvanized steel. Weld on applications produce the maximum allowable down load listed.
B and HB hangers require the use of web stiffeners. BA MIN nailing does not require web stiffeners. BA MAX nailing requires the use of web stiffeners.
Ledgers must be evaluated for each application separately. Check TF dimension, nail length and nail location on ledger.

NOTE: The correct fasteners installed in the correct position must be used to achieve published load values

California Residents: WARNING

Simpson Strong-Tie DHU212 Drywall Hanger

Simpson Strong-Tie HD5B - 9-3/8 Galvanized (G90) Bolted Holdown

Simpson Strong-Tie IUS2.06/9.5 is used to install 2 x 9-1/2 I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required.

Simpson Strong-Tie IUS2.06/11.88 Face Mount I-Joist Hanger

Simpson Strong-Tie HUC5.125/16 Concealed Flange Hanger

The newly improved Simpson Strong-Tie HB hangers offer wide versatility for I-joists and structural composite lumber. The enhanced load capacity

Simpson HB5.50/11.88 Top Flange I-Joist Hanger - G90 Galvanized

The SU Series of hangers are skewed 45 deg left or right. Angled nail slots direct nails for proper installation.

Simpson Strong Tie SUR210 2x10 Face Mount Joist Hanger Skewed Right

Simpson Strong-Tie HGLTV5.516 5-1/4 x 16 Top Flange I-Joist Hanger

Simpson Strong-Tie SUR414 - Joist Hanger for 4x14, Skewed Right Product Details The SUR/L are 45-skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45 to the right (SUR) and the left (SUL) respectively.

Simpson Strong-Tie SUR414 - Joist Hanger for 4x14, Skewed Right

The VPA may be sloped in the field, offering a versatile solution for attaching rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSU. This connector eliminates the need for notched rafters, beveled top plates and toe nailing.

Simpson Strong-Tie VPA4 3-1/2in Variable Pitch Connector

Simpson Strong-Tie HD5B - 9-3/8 Galvanized (G90) Bolted Holdown

The SUR/L are 45-degree skewed hangers designed to support solid sawn and engineered wood products used in wood construction. These U-shaped hangers encapsulate the top flange of the joist, so no web stiffeners are required for standard installation. The SUR and SUL hangers are identical except that they are skewed 45-degrees to the right (SUR) and the left (SUL), respectively.

Simpson Strong Tie SUL210 2-Inch by 10-Inch Joist Hanger Skewed Left