Corning® External Temperature Controller for Digital Display Hot

Corning® External Temperature Controller for Digital Display Hot

This temperature controller is designed to take the guesswork out of controlling liquid temperatures on the digital display PC-400D and PC-600D hot plates and PC-420D and PC-620D stirring hot plates. Controls the temperature of liquids up to 200ºC in vessels on top of the Pyroceram heated top. Increases accuracy and repeatability by controlling liquid temperature not top plate temperature. When in use, the controller icon on the display well be lit and the temperature control on the unit can be set from 5-200ºC. CAUTION: A 200ºC setting when using 6795PR does not mean that the top plate is at 200ºC. Top plate temperature could be as high as 550ºC. Temperature controllers are not available to use with stirrer only units.

Corning 6798-400D PC-400D Digital Hot Plate with 5 x 7 Pyroceram

AccuBlock Digital Dry Bath

LFI3751 TEC Temperature Controllers Wavelength Electronics

Hot Plates Spectrum Pharmacy Equipment

Corning 6795PR External Temperature Controller for Digital Display

Temperature Control Hot Plates at Thomas Scientific

For Use With: PC-400D and PC-600D Hotplates and PC-420D and PC-620D Stirring Hotplates

Corning™ External Temperature Controller

Hotplate has a US three-prong plug, works with a 120V/60Hz power source, and comes with a built-in rod support 10 x 10-inch (W x D) glass-ceramic

Corning 6795-600D PC-600D Hot Plate, Digital Display, 10 x 10 Pyroceram Top, 40.1 x 26.9 x 26.9cm (L x W x H), 5 to 550 Degrees C, 120V/60Hz

Digital Stirring Hot Plate at Thomas Scientific

Corning 6795-400D PC-400D Hot Plate, Digital Display

Sigma Corning LSE Digital Dry Bath Heaters, Dual Block, AC/DC Input 120 V AC, US 3-Pin Plug

C7041D2001 Immersion Temperature Sensor

Honeywell Digital Temperature Controller DC1040cr-701000-E