3M Micro Abrasive Film for Scary Sharpening - PSA

September 22,2024

quot;Scary Sharp" sticky back sandpaper as recommended by Fine Woodworking for sharpening all kinds of tools and knives

Three sheets 9 micron (1800 grit) lapping film 8.5 x 11 PSA (pressure sensitive adhesive) backing 3 mil high-strength polyester film backing

3 Sheet Bundle 9 Micron (1800 Grit) PSA Lapping Microfinishing Film Aluminum Oxide (AO) 8 1/2” x 11” 266Xx3

This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40. 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets. Float glass will accommodate a half sheet of lapping film. Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.

Taytools 279205 Lapping Microfinishing Sharpening

3M™ PSA adhesive backed Microfinishing Film is essentially a heavier duty version of imperial lapping film with a slightly thicker film backing and a

3M™ Micro Finishing Film 40 Micron SiC (PSA)

Our 3M Cubitron II Stikit Film Disc 775L features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

3M Cubitron II Stikit Film Disc 775L, 77553, 80+ to 220+, 6 in x NH, Die 600Z, 20 Packs/Case, Multi Pack

Measures 8-1/2 x 11 30 Micron; approximately 400 Grit With 3M micron-graded abrasives, you can remove a controlled amount of material and leave a

10/Pk 8-1/2 x 11 3M Imperial Micro-Finishing Film 30 Micron 400 Grit Jewelry Making Abrasive Wet or Dry Polishing Sheets

Scary Sharp Sharpening System: 3M PSA Aluminum Oxide Lapping Microfini

This lapping film is 100% made in the USA by 3M™. These microfinishing lapping sheets were developed for industrial applications and can be used to

3M™ 10 Sheet Set Non-PSA Lapping Microfinishing Film (AO) 8-1/2” x 11”

7 Sheet Variety Pack PSA Pressure Sensitive Adhesive (.3, 1, 3, 9, 12, 30 and 40 microns) Lapping Microfinishing Film Aluminum Oxide (AO) 8-1/2 x 11

3M™ Micro Finishing Film 30 Micron SiC (PSA)

3M PSA (Adhesive Backed) 268L Micro Finishing Film Kit-1 Each all Grits

These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. This super-fast cutting, long-lasting, water resistant abrasive provides precise, consistent, close tolerance finishes, but excel when used on harder materials such as hardened steel, carbide or gemstones.

3M Diamond Lapping Microfinishing Film 3 Inches x 8 Inches PSA Backing

This lapping film is 100% made in the USA by 3M™. These microfinishing lapping sheets were developed for industrial applications and can be used to

3M™ 7 Sheet Pack Aluminum Oxide 8-1/2 x 11 Microfinishing/Lapping Film PSA

Scary Sharp Sharpening System: 3M PSA Aluminum Oxide Lapping Microfini

Taytools 279199 Two Sheets 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp