6 Mil Plastic Flashing with Termite Protection

August 30,2024

ObeX11 Brick Ledge is a 6 mil roll specifically designed for newly constructed brick ledges. Industry standard traditionally uses a 6 mil polyethylene roll with no termite protection. Obex11 takes that same 6 mil thickness, but gives an additional layer of termite protection. The roll is 12 inches wide, which gives customers 5 to 6 inches of coverage on any standard brick ledge and additional material to return up the wall sheeting. Once installed, this roll gives the customer a permanent layer of protection where termites commonly enter the home. This material is avaliable in many different sizes and

AMERIMAX HOME PRODUCTS 66314 14-Inch x 10-Feet Aluminum Flashing

ObeX11 Brick Ledge is a 6 mil roll specifically designed for newly constructed brick ledges. Industry standard traditionally uses a 6 mil polyethylene

Brick-Siding Flashing Roll (300 square feet)

𝐏𝐥𝐚𝐬𝐭𝐢𝐜 𝐒𝐡𝐞𝐞𝐭𝐢𝐧𝐠 - Adds a layer of protection to your floors, materials, furniture and equipment during messy projects. 𝐆𝐫𝐞𝐞𝐧𝐡𝐨𝐮𝐬𝐞 - The plastic

Plastic Sheeting (10' x 25') Long, 6 Mil Poly Sheeting Polyethylene Film, Heavy Duty Greenhouse Plastic Sheeting

TERM SILL MOISTURE, TERMITE BARRIER

PolyGuard - Term Flashing Termite Barrier - 4 x 75' Roll. Non Chemical, Non STRUCTURAL Insect and Moisture Barrier. Self Adhesive Sheet, 40mil

6 Mil Plastic Flashing with Termite Protection

MCA Fire Rated Plastic Poly Sheeting 12 Feet x 100 Feet, 6 mil

TERM Flashing | Termite Barrier is applied where the horizontal concrete slab intersects with exterior sheathing. This area is a frequent entry point

POLYGUARD - Term Flashing Termite Barrier - 4 x 75' Roll. Non Chemical, Non Structural Insect and Moisture Barrier. Self Adhesive Sheet, 40mil

York 106 TS 10 in. W x 720 in. L Copper Flashing Copper

Termite-Resistant Foundations and Walls

Shop Plastic Sheeting and Poly Sheets for Termite Protection at ObeX11