10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](http://www.hhblanksandmore.com/cdn/shop/products/FrostedMug.jpg?v=1624683235)
10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More
GLASS MUGS (CLEAR & FROSTED) SUBLIMATIONThere are a few important things to know about glass mugs before yousublimate. First the mugs are similar to all other sublimated products inthat the transfer and mug surface need to make direct contact and reach about400 degrees before sublimation will occur and glass takes.
GLASS MUGS (CLEAR & FROSTED) SUBLIMATION
There are a few important things to know about glass mugs before you
sublimate. First the mugs are similar to all other sublimated products in
that the transfer and mug surface need to make direct contact and reach about
400 degrees before sublimation will occur and glass takes longer to heat than
most products.
Secondly the mug needs to have a poly-coating in order to accept the
sublimation ink. Optimal image quality will be achieved using mugs
specifically designed for sublimation.
Sublimation mugs can be sublimated using a mug press or using an oven with a
mug wrap. The directions for both a mug press and oven are below. If you are
using a wrap a convection oven is recommended.
Thirdly because not all mug presses and ovens are created equally the dwell
time can range from 5 to 7 minutes in a mug press or 12 to 17 minutes in an
oven. Some experimenting with dwell time may be necessary for best results.
Directions for using a mug press and a wrap in an oven are listed below.
METHOD 1 - USING A MUG PRESS:
Supplies needed:
- sublimatable substrate (glass mug)
- sublimation transfer
- scratch paper
- heat tape
- Fan for cooling
Mug heat press settings:
- temperature - 400 degrees F
- dwell time - 5:00 - 7:00 minutes (see the press manufacturer for recommended
dwell time for glass mug)
- pressure - light
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the mug press brand and model ink and paper
and atmospheric conditions.
2nd Note: Be sure that the artwork does not go beyond the size limits of the
mug press.
Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
6. Center the mug in the mug press.
7. Close the mug press using the mug heat press settings above.
8. Remove items from the press immediately. Use heat resistant gloves if
necessary - the items will be very hot.
9. Tear off the scratch paper and the transfer and place in front of fan for
cooling.
Tips:
- DO NOT place mugs into water after sublimation - cracking will occur. Use a
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time slightly (30-60 seconds).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds).
- Too much pressure can cause trapped moisture in the paper to jet away
pulling ink with it in a spiked-peaked formation. To avoid this reduce the
pressure.
METHOD 2 - USING A MUG WRAP:
Supplies needed:
- convection oven
- silicone mug wrap
- sublimatable substrate (glass mug)
- sublimation transfer
- scratch paper
- Fan
Oven settings:
- temperature - 400 degrees F
- dwell time - 12:00 - 18:00 minutes (depending on the wrap and oven type)
- mug wrap pressure - light to medium
Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the oven brand and model ink and paper and
atmospheric conditions.
2nd Note: Be sure that the artwork does not go beyond the size/dimension
limits of the mug wrap.
3rd Note: Convection ovens are recommended over traditional ovens for even
distribution of heat.
4th Note: Preheat the oven to 400 degrees F before placing the mug into the
oven.
Steps:
1. cut your transfers so that the transfer is slightly larger vertically than
the mug.
2. Position the substrate onto the transfer.
3. Tape two ends of the transfer near the handle of the mug using the heat
tape.
4. Wrap a piece of scratch paper around the transfer and mug taping if
necessary.
5. Wrap the silicone wrap around the mug and push the metal prongs through the
metal loops and squeeze together with both hands until secured.
6. Using the oven settings above stand the mug up in the oven. If placing
multiple mugs leave space between each to allow for proper heat & air
circulation.
7. Remove items from the oven after the appropriate dwell time using heat
resistant gloves if necessary - the items will be very hot.
8. Remove the mug wrap tear off the scratch paper and the transfer and place
mug in front of fan.
Tips:
- DO NOT place mugs into water after sublimation - cracking will occur. Use
fan instead.
- If the image of the final product appears light increase the pressure or
the dwell time (1-3 minutes).
- If the image on the final product appears blurred or substrate appears
yellowed or has brown spots on the rim of the top or bottom of the mug reduce
the dwell time slightly (15-30 seconds)..
GLASS MUGS (CLEAR & FROSTED) SUBLIMATIONThere are a few important things to know about glass mugs before yousublimate. First the mugs are similar to all other sublimated products inthat the transfer and mug surface need to make direct contact and reach about400 degrees before sublimation will occur and glass takes longer to heat thanmost products.Secondly the mug needs to have a poly-coating in order to accept thesublimation ink. Optimal image quality will be achieved using mugsspecifically designed for sublimation.Sublimation mugs can be sublimated using a mug press or using an oven with amug wrap. The directions for both a mug press and oven are below. If you areusing a wrap a convection oven is recommended.Thirdly because not all mug presses and ovens are created equally the dwelltime can range from 5 to 7 minutes in a mug press or 12 to 17 minutes in anoven. Some experimenting with dwell time may be necessary for best results.Directions for using a mug press and a wrap in an oven are listed below.METHOD 1 - USING A MUG PRESS:Supplies needed:- sublimatable substrate (glass mug)- sublimation transfer- scratch paper- heat tape- Fan for coolingMug heat press settings:- temperature - 400 degrees F- dwell time - 5:00 - 7:00 minutes (see the press manufacturer for recommendeddwell time for glass mug)- pressure - lightNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the mug press brand and model ink and paperand atmospheric conditions.2nd Note: Be sure that the artwork does not go beyond the size limits of themug press.Steps:1. cut your transfers so that the transfer is slightly larger vertically thanthe mug.2. Position the substrate onto the transfer.3. Tape two ends of the transfer near the handle of the mug using the heattape.4. Wrap a piece of scratch paper around the transfer and mug taping ifnecessary.6. Center the mug in the mug press.7. Close the mug press using the mug heat press settings above.8. Remove items from the press immediately. Use heat resistant gloves ifnecessary - the items will be very hot.9. Tear off the scratch paper and the transfer and place in front of fan forcooling.Tips:- DO NOT place mugs into water after sublimation - cracking will occur. Use afan instead.- If the image of the final product appears light increase the pressure orthe dwell time slightly (30-60 seconds).- If the image on the final product appears blurred or substrate appearsyellowed or has brown spots on the rim of the top or bottom of the mug reducethe dwell time slightly (15-30 seconds).- Too much pressure can cause trapped moisture in the paper to jet awaypulling ink with it in a spiked-peaked formation. To avoid this reduce thepressure.METHOD 2 - USING A MUG WRAP:Supplies needed:- convection oven- silicone mug wrap- sublimatable substrate (glass mug)- sublimation transfer- scratch paper- FanOven settings:- temperature - 400 degrees F- dwell time - 12:00 - 18:00 minutes (depending on the wrap and oven type)- mug wrap pressure - light to mediumNote: The recommended settings above may need adjustments for best results.Settings will vary depending on the oven brand and model ink and paper andatmospheric conditions.2nd Note: Be sure that the artwork does not go beyond the size/dimensionlimits of the mug wrap.3rd Note: Convection ovens are recommended over traditional ovens for evendistribution of heat.4th Note: Preheat the oven to 400 degrees F before placing the mug into theoven.Steps:1. cut your transfers so that the transfer is slightly larger vertically thanthe mug.2. Position the substrate onto the transfer.3. Tape two ends of the transfer near the handle of the mug using the heattape.4. Wrap a piece of scratch paper around the transfer and mug taping ifnecessary.5. Wrap the silicone wrap around the mug and push the metal prongs through themetal loops and squeeze together with both hands until secured.6. Using the oven settings above stand the mug up in the oven. If placingmultiple mugs leave space between each to allow for proper heat & aircirculation.7. Remove items from the oven after the appropriate dwell time using heatresistant gloves if necessary - the items will be very hot.8. Remove the mug wrap tear off the scratch paper and the transfer and placemug in front of fan.Tips:- DO NOT place mugs into water after sublimation - cracking will occur. Usefan instead.- If the image of the final product appears light increase the pressure orthe dwell time (1-3 minutes).- If the image on the final product appears blurred or substrate appearsyellowed or has brown spots on the rim of the top or bottom of the mug reducethe dwell time slightly (15-30 seconds).
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://i.etsystatic.com/18284178/r/il/dbce78/5627811355/il_fullxfull.5627811355_alus.jpg)
Frosted Sublimation
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://img4.dhresource.com/webp/m/260x260/f3/albu/km/l/27/7d4c134a-ce1d-45fb-89de-6b5ddd51a07e.jpg)
Wholesale 11 Oz Frosted Glass Sublimation Mug With Handle For Heat Thermal Coating Transfer Blank Blank Mugs For Coffee Making DH3EZ From Bdesybag, $1.55
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://www.htvront.com/cdn/shop/products/71y-VFG8WdL._AC_SX679_520x520.jpg?v=1698895011)
Sublimation Clear/Frosted Glass Blanks with Bamboo Lid - 16oz 4 Pack – HTVRONT
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://i.etsystatic.com/22480741/r/il/094cdc/4228915621/il_fullxfull.4228915621_n1sn.jpg)
Frosted Sublimation
4 Pack 15oz Frosted Glass Sublimation Mug
10 oz Clear Glass Mug. Handle extends 1 3/8 from mug. Hand wash only, Mug heat press settings:, - temperature - 400 degrees F, - dwell time - 5:00
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://b4x7y4f4.rocketcdn.me/wp-content/uploads/2021/06/SM10C-mock.jpg)
Sublimatable Clear Glass Mug with Handle
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://m.media-amazon.com/images/W/MEDIAX_792452-T2/images/I/715qWpiP9fL.jpg)
AGH 6 Pack Sublimation Glass Blanks Frosted 10 oz Glass Beer Can Cup, Glass Sublimation Tumblers with Splash-proof Bamboo Lid and Straw, Sublimation Glass Jar for Juice Coffee Milk Soda, Great
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://www.bestsub.com/media/k2/items/cache/dd3454678e80e270f36e939b795d4e8d_M.webp)
10oz Mugs - BestSub - Sublimation Blanks,Sublimation Mugs,Heat Press,LaserBox,Engraving Blanks,UV&DTF Printing
![10 oz. Sublimatable Frosted Glass Mug with Handle – Hernandez Homemade Blanks & More](https://m.media-amazon.com/images/W/MEDIAX_792452-T2/images/I/31NVO8pQQQL._AC_UF350,350_QL80_.jpg)
Sublimation Glass Frosted Blank Gift Mug 11 Ounces 1 Piece Heat Thermal Coating Transfer Dye Diswashable Microwave Safe