PLW02-I X10 Pro Wall Switch Module 3-way (Ivory) –

July 04,2024

Upgrade your existing 3-way wall switch and have total control indoor and out!! Automate your lights, remotely control them & make them dimmable! Upgrade your existing 3-way wall switch to a Home Automation-enabled wall switch. This 3-way switch module set is perfect for automation of indoor/outdoor lights including front porch, patio, hallway, and stairway lights currently controlled by two or more switches. Expanding your X10 system to include wired-in lights is a snap with these easy-to-use X10 light switches. This wall switch will respond to the ALL LIGHTS ON/ALL UNITS OFF command, and you can dim the light from any X10 transmitter with DIM/BRIGHT control. Just like the standard X10 wall switch, you can use the three-way wall switch with the Mini Timer, Mini Controller or WM100 WiFi module to control and setup timers from your smart device! Item is.
Upgrade your existing 3-way wall switch and have total control indoor and out!! Automate your lights, remotely control them & make them dimmable! Upgrade your existing 3-way wall switch to a Home Automation-enabled wall switch. This 3-way switch module set is perfect for automation of indoor/outdoor lights including front porch, patio, hallway, and stairway lights currently controlled by two or more switches. Expanding your X10 system to include wired-in lights is a snap with these easy-to-use X10 light switches. This wall switch will respond to the ALL LIGHTS ON/ALL UNITS OFF command, and you can dim the light from any X10 transmitter with DIM/BRIGHT control. Just like the standard X10 wall switch, you can use the three-way wall switch with the Mini Timer, Mini Controller or WM100 WiFi module to control and setup timers from your smart device! Item is the IVORY color model. Also available in white. Specs X10 Product No.: LW02-IWhat's Included: (1) X10 3-Way Wall Switch Module Set - Ivory (PLW02-I)Load Range: 60W to 500WCompatible Load Type: Incandescent onlyColor: IvoryDownloads: Product Manual Note: When two switches control the same light, it's called a three-way circuit. A three-switch system is a four-way circuit, etc. Each three-way circuit requires one master switch and one companion switch. For circuits with more than two switches, simply add additional companion switches for each additional switch. The X10 wall switch can only be used with incandescent lights. All X10 compatible dimmer switches and modules rely on the conduction path through the incandescent bulb filament and will not work properly with other loads. For halogen or fluorescent, use something like the XPS4 Wall Switch. Wall plates sold separately.

X10 Appliance Wall Switch with Silent Relay (XPS4)

Philips 2-Pack Hue wall Switch Module, White

WS13A Decorator Wall Switch –

Add X10 control to dimmable lighting with the X10 Push Button Dimmable Wall Switch Module. This X10 dimmer switch replaces an existing dimmer switch to provide both local and X10 control of a connected light fixture or small appliance. This module controls dimmable LED, halogen, and incandescent lights rated up to 500W. The switch comes with a built-in LED to indicate on/off status and help you find the switch at night.

X10 Ws18a Push Button Dimmable Wall Switch Module

Upgrade your existing 3-way wall switch and have total control indoor and out!! , Automate your lights, remotely control them & make them dimmable!,

PLW02-I X10 Pro Wall Switch Module 3-way (Ivory)

You can now automate your lights and make them dimmable while controlling them remotely!, If you have a standard single pole switch it can now be

PLW01 Soft Start Dimmable Wall Switch

PS52, 9ft Lighted Foot Switch

Responds to ALL Lights ON. Rated at 500 Watts. No feed through connectors. White & Ivory rockers included. The XPD3 (3-way master/single pole)

XPD3-IW Master Dimmer Switch

Upgrade your existing 3-way wall switch and have total X10 PRO control indoor and out! Automate your lights, remotely control them & make them

PLW02 3 Way Soft Start Dimmable Light Switch

X10 Appliance Wall Switch with Silent Relay (XPS4)

The X10 Push Button Relay Wall Switch replaces a standard wall switch to add X10 control to a connected wired load. The Push Button Relay Wall switch works with lighting fixtures including incandescent, LED, Fluorescent, Halogen, and more! The switch comes with a built-in LED to indicate on/off status and help you find the switch at night.

X10 WS469 Push Button Relay Wall Switch